THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for electric
current and reduces the risk of electric shock. This tool is equipped with an electric cord that has
an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching electrical recep-
tacle that is properly installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED.
If it will not fit the electrical receptacle, have the proper electrical receptacle installed by a qualified electrician.
IMPROPER ELECTRICAL CONNECTION of the equipment grounding conductor can result in risk of electric shock. The
conductor with the green insulation (with or without yellow stripes) is the equipment grounding conductor. DO NOT con-
nect the equipment grounding conductor to a live terminal if repair or replacement of the electric cord or plug is neces-
sary. CHECK with a qualified electrician or service personnel if you do not completely understand the grounding instruc-
tions, or if you are not sure the tool is properly grounded.
USE ONLY A 3-WIRE EXTENSION CORD THAT HAS A 3-PRONG GROUNDING PLUG AND A 3-POLE RECEPTACLE
THAT ACCEPTS THE TOOL’S PLUG. REPLACE A DAMAGED OR WORN CORD IMMEDIATELY.
This tool is intended for use on a circuit that has an electrical receptacle as shown in Left Figure. Shows a 3-wire elec-
trical plug and electrical receptacle that has a grounding conductor. If a properly grounded electrical receptacle is not
available, anadapter as shown in Right Figure can be used to temporarily connect this plug to a 2-contact ungrounded
receptacle. The adapter has a rigid lug extending from it that MUST be connected to a permanent earth ground, such as
a properly grounded receptacle box. THIS ADAPTER IS PROHIBITED IN CANADA.
WARNING
To assure that no damage has been done to this unit during shipment, move the grinding wheel manually before electri-
caly running this unit.
If the grinding wheel does NOT spin freely, check this operation manual to make proper adjustments.
3
WARRANTY
This Grinder is warranted against defects in materials and workmanship for a period of two (2) years from the date of pur-
chase. This warranty applies to the purchaser of this product, and is limited to repair or replacement of the product or it’s
parts at PSI Woodworking Products’ discretion. Excluded are parts, which have been misused, abused, altered, or con-
sumed by normal operation of the machine. Also excluded are direct or consequential damages to the persons, property,
and/or materials. Your invoice serves as proof of purchase and must be referenced prior to return authorization. Contact
your dealer where you purchased your grinder for service or repair issues.