ALF-13131-E-02
All-Flo
17
STEP 7
Remove the “Air Valve Spool” from
the main “Air-Valve Assembly”.
Note: Insert larger chamfer first
(longer piston/smaller boss). The
smaller chamfer is to be on the
plug side (larger boss).
STEP 8
Using the pick, remove the “Lip
Seal (Air Valve)” from the main
“Air-Valve Assembly”.
STEP 9
Using the pick, remove the
second “Lip Seal (Air Valve)” from
the main “Air-Valve Assembly”.
AIR VALVE ASSEMBLY
To assemble the air valve, reverse the order of disassembly. During
assembly, ensure that the open side of the lip-seals are both facing each
other inward. Install the shuttle plate with the smooth/shinny side toward
the shuttle car. Lubrication of the air valve assembly, with a non-synthetic
lubricant, is recommended. Magna-Lube or Magna-Plate are recommended
for assembly lubrication (see detailed parts list for ordering information).
Note that if the lip-seals are installed incorrectly, they will be unable to
rotate. Insert the spool, larger chamfer first (longer piston/smaller boss),
smaller chamfer to be on the plug side (larger boss), ensure O-ring is in-
stalled and then the air-valve end plug into position.
