PSC ProMix 6, Operational Manual

Page: 15 / 18

14
To consumer cameras (3.5mm input jack)
To interface your ProMix 6 audio mixer to most consumer cameras is easy. You
must simply have the appropriate cable to interface the two devices and then set
the output level of the ProMix 6 to the correct level to correspond with your
camera’s input. In most cases the camera will only be able to work with
microphone level. (-50dB) You may use one of the two available auxiliary
outputs to feed most consumer cameras. These auxiliary outputs are stereo ¼”
jacks on the right hand side of the ProMix 6. You must simply set the audio level
for the auxiliary output you are going to use to –50dB and then plug in a cable
with a ¼” stereo connector into this jack. The other end of the cable should have
a 3.5mm stereo mini plug to be able to plug it into your camera.
DEVICE: DEVICE
INPUT
CONECTOR PROMIX 6
OUTPUT
CONECTOR PROMIX 6
OUTPUT
SWITCH
SETTING SIGNAL
LEVEL NOTES:
PRO AUDIO
RECORDERS
WITH XLR
LINE LEVEL
INPUTS
XLR, LINE
LEVEL XLR “0” 0dBv Straight
XLR Cable
PRO AUDIO
RECORDERS
WITH XLR MIC
LEVEL
INPUTS
XLR, MIC
LEVEL XLR “-50” -50dBv Straight
XLR Cable
PRO
CAMERAS
WITH XLR
LINE LEVEL
INPUTS
XLR, LINE
LEVEL XLR “0” 0dBv Straight
XLR Cable
PRO
CAMERAS
WITH XLR MIC
LEVEL
INPUTS XLR, MIC
LEVEL XLR “-50” -50dBv Straight
XLR Cable
SEMI PRO
CAMERAS
WITH XLR
INPUTS (PD –
150, ETC)
XLR, LINE
LEVEL XLR “-10” -10dBv
Consumer
Line level
PD-150 Straight
XLR Cable
SEMI PRO
CAMERAS
WITH XLR
INPUTS (PD –
150, ETC)
XLR, MIC
LEVEL XLR “-10dB” -10dBv Straight
XLR Cable