PowerWedge 10 Installation
11
PowerWedge
®
10
Installing a Magnetic Stripe Reader (MSR)
Both connectors on the PowerWedge 10 Wedge and PowerWedge 10
Serial can accept input from magnetic stripe readers. However,
INPUT
1
is
optimized for bar code readers. Attach your magnetic stripe reader to
INPUT
2
(see
). If you are using two MSRs, connect the primary one
to
INPUT
2
and the other one to
INPUT
1
.
For information about programming parameters for magnetic stripe read-
ers, see page 33.
Figure 5. PowerWedge 10 Input Connectors (both models)
INPUT
2—connect primary
magnetic stripe reader
INPUT
1—connect
bar
code reader
or second
magnetic stripe reader
Drawing not to scale
