Thumb screws installed and finger tightened.
BATTERY CHARGER HEAT DISSIPATION:
The PSC Power Star Element uses an external 10-amp
battery charger. This charger will get quite warm in use. You must provide adequate airflow
around the charger so that is can properly dissipate the heat given off while charging. Do not
operate the charger with the charger fully enclosed such as in a drawer, or packed tightly within
other equipment. It must have some free space around every side of the body of the charger in
order that it dissipate heat correctly. Failure to provide proper ventilation can and will damage
the unit and will void your warranty. To charge the unit, simply connect the chargers inline
SpeakOn connector to the matching SpeakOn chassis connector on the PowerStar Element and
then plug the charger into AC power.
Charger plugged into PowerStar Element showing Blue LED “Charger” indicator.
