PSC M4 mkII Operation Manual Download Page 15

 15

 
 

B: 

TO RDAT RECORDERS:  

 

The M4mkII Mixer can be interfaced to virtually any professional recorder via the 
standard XLR outputs.  In addition, you can use the 10 pin Hirose tm  connector 
if you desire to use the tape return function. 

 
 

C: 

TO WIRELESS MICROPHONES:  

 

The M4mkII Mixer will easily accept the output signal from virtually any wireless 
receiver.  It can accept microphone or line level signal via a simple switch setting.  
Please note that most wireless receivers are not compatible with 48PH mic 
power.  You should always set the M4mkII’s mic powering switch to “D” dynamic 
when using wireless receivers. 

 

The M4mkII Mixer can also be used to send audio signals to Betacams via 
wireless transmitters.  The use of transmitters is normally accomplished by 
connecting the M4mkII’s output XLR to the audio input of the specific transmitter.  
Many transmitter manufacturers supply application specific cables for this 
purpose.  The M4mkII Mixer has been designed to minimize RF interference 
through the use of output transformers and other RF filtering.  It is important to 
note that transmitter placement greatly affects transmit range and clarity.  For 
best results, transmitters should be mounted away from the mixers surface 
allowing un-impeaded RF radiation.  This can be accomplished by mounting the 
transmitters up and away from the mixer on the PortaBrace Strap. 
 
 

WARRANTY AND NON-WARRANTY SERVICE 

 

In the unlikely event your M4mkII Mixer requires service it should be carefully 
packed and shipped prepaid to: 

 

Professional Sound Corporation 

Service Department 

28085 Smyth Drive 

Valencia, CA  91355 USA 

PH 661-295-9395 

FAX 661-295-8398 

e-mail 

[email protected]

 

 

Please call before shipping your mixer.  We may be able to solve your problem 
via the phone.  Many older M4 and M4A+ Mixers have been shipped in to us for 
service with incorrect switch settings.  We are always willing to help you with your 
M4mkII Mixer questions.   

 

WARRANTY   

Complete details of the PSC M4mkII Mixer warranty are 

given on the enclosed blue warranty registration card.  If you did not receive one, 
please contact your local dealer or call us directly.  

 

Summary of Contents for M4 mkII

















Reviews: