8
PMA7000M Pilot
202-780-0604 Jan 2015
Calls are answered or placed from the telephone itself.
In the
All
intercom mode, everyone is on the telephone and hears selected
radio audio. The pilot and copilot will have full transmit capability on the
selected transceiver Com 1 or 2, simply by using their respective PTT
switch.
In
CREW
mode, the pilot and copilot may use the telephone. Passengers
will not hear telephone or other radios.
In
ISO
intercom mode, the pilot position is in the "Phone Booth." He will
also have access to Com 1 or 2, and will transmit on that radio using the
PTT. All selected audio is provided.
Note: Because the telephone uses an intercom circuit, all stations on
that circuit will lose intercom capability when the telephone is in use.
Pairing and unpairing Bluetooth devices
The PMA7000M can be paired with up to eight individual devices. When
that number is exceeded, one device will be automatically un-paired to al-
low the new device. The device eliminate will be selected at random by the
Bluetooth module.
Hint, if your old phone is not recognized by the
PMA7000M, you may need to clear the audio panel and re-pair.
To reset the Bluetooth, Hold Nav 1 and Nav 2 buttons at the same time for
more then 3 seconds.
Pairing separate music and telephone devices
It is possible to use a different music source (iPad, iPod with Bluetooth
adapter, Bluetooth enabled laptop, etc) and telephone. However, the music
source must be paired
first
,
before
the telephone, if the telephone also has
music streaming capability. Otherwise, the Smartphone will also take over
the music streaming. Note: iPhones will probably take control over other
music devices. In Droid you may select music or phone only. With Black-
berry, you may have to manually select the PMA7000M as audio source for
each call.
When a Bluetooth-enabled telephone is paired and connected with the
PMA7000M, the audio panel will serve as a connection to the aircraft occu-
pants. You can make and answer calls from the telephone handset.
In some cases, you will need to select the PMA7000M as your audio source
to connect on a call:
