background image

12

PMA7000M Pilot

202-780-0604 Jan 2015

This will allow the service technician to provide any other suggestions for
identifying the problem and recommend possible solutions.
After discussing the problem with the technician and you obtain a Return
Authorization Number, ship product to:

PS Engineering, Inc.
Attn: Service Department
9800 Martel Rd
Lenoir City, TN 37772
(865) 988-9800

FAX (865) 988-6619

Email: [email protected]

NOTE: PS Engineering will not be responsible for any product returned to
us by US Mail, or in other than the original or UPS approved equivalent
packaging.  Units without an RMA or detailed description of problem AND
a contact phone number will be refused.

PS Engineering, Inc. 2015 ©

Copyright Notice

Copyrighted information in this manual is subject to change without notice. PS Engineering
reserves the right to improve or change the products or contents of this manual, without
notification of any person or agency. The contents of this pilot’s guide may be downloaded,
stored and reprinted for personal use provided that this copyright information is included.
Commercial use is strictly prohibited. For further information contact the Publications Man-
ager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-
9800

Record

PMA7000M Serial Number: _________________

Date of Purchase:__________________________

Installed by: ______________________________

Summary of Contents for PMA7000M













Reviews: