202
-
045
-
0300
Page 9
Revision 2
PAC45 Pilot Guide
If the audio controller is turned on before the Bluetooth device, you will
have to manually connect from your Bluetooth device. Otherwise once
paired, the audio controller should connect automatically.
Hint, if your devices are not recognized by the PAC45, you may need to
reset the Bluetooth module, Press and hold HRTF and ICS buttons for more
than three (>3) seconds.
Bluetooth® Telephone Mode
The PAC45 serves as a full duplex interface for telephone systems such as
portable cellular phones with Bluetooth connectivity.
Warning: United States FCC Regulations contained in 47 CFR § 22.925
currently contain prohibition on airborne operation of cellular telephones.
“
Cellular telephones installed in or carried aboard airplanes, balloons or
any other type of aircraft must not be operated while such aircraft are air-
borne (not touching the ground). When any aircraft leaves the ground, all
cellular telephones on board that aircraft must be turned off.
”
To answer an incoming call, or initiate a call from the PAC45, select the
TEL volume control to the
out position
.
In ALL intercom mode, all crew and passengers will be heard on the phone
when they speak. All will hear selected audio. Com audio is automatically
heard in the headsets.
In CREW mode, the pilot and copilot are connected to the telephone. The
pilot and copilot will have transmit capability on the selected transceiver,
simply by using their respective PTT switch.
In ISO intercom mode, when the PAC45 is in the TEL mode, the pilot posi-
tion is in the "Phone Booth." Only the pilot will hear the telephone, and
only he will be heard. He will also have access to Com 1 or 2, and will
transmit on that radio using the PTT. All selected audio is provided.
NOTE
PS Engineering does not guarantee compatibility with personal cellular
telephones.
Bluetooth Reset
if the Bluetooth stops connecting to a device, or operates incorrectly
first try turning Bluetooth off, and back on from your de-
vice. If also me be necessary to reset the Bluetooth module,
clearing out the connected devices. Press HRTF and ICS for
more than three seconds. This may be necessary if the Bluetooth
stops connecting to a device, or operated incorrectly.
