Page 12
202
-
045
-
0300
July 2019 PAC45 Pilot Guide
5.
Now COM2 will blink, to indicate the recording of ALERT #2.
6.
Speak message.
7.
When finished with Alert #2, press the
“
ACK
”
8.
Now COM3 blinks, to indicate the recording of ALERT #3.
9.
Speak message.
10.
When finished with Alert #3, press the
“
ACK
”
11.
A chime indicates that recording is now finished.
NOTE: If ACK is not pressed to indicate end of recording, it will record for
five seconds, and then advance to next alert. After all three time slots are
timed out, the PAC45 will exit the alert recording mode.
PS Engineering, Inc. 2018 ©
Copyright Notice
Copyrighted information in this manual is subject to change without notice. PS Engineering reserves the right to improve or
change the products or contents of this manual, without notification of any person or agency. The contents of this pilot
’
s guide
may be downloaded, stored and reprinted for personal use provided that this copyright information is included. Commercial use is
strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir
City, TN 37772. Phone (865) 988
-
9800
Warranty & Service
In order for the factory warranty to be valid, the installations in a certified aircraft must be accom-
plished by an FAA
-
(or other ICAO agency) certified avionics shop and authorized PS Engineering
dealer. If the unit is being installed by a non
-
certified individual in an experimental aircraft, a
factory
-
made intercom harness must be used for the warranty to be valid.
PS Engineering, Inc. warrants this product to be free from defect in material and workmanship for
a period of two (2) years from the date of retail sale by authorized PS Engineering dealer. During
the first
twelve (12) months
of the two
-
year warranty period, PS Engineering, Inc., at its option,
will send a replacement unit at our expense if the unit should be determined to be defective after
consultation with a factory technician. For the remaining
twelve (12) months
of the two
-
year
warranty period, PS Engineering will send a no
-
cost replacement unit at customer shipping ex-
pense.
All transportation charges for returning the defective units are the responsibility of the purchaser.
All domestic transportation charges for returning the exchange or repaired unit to the purchaser
will be borne by PS Engineering, Inc. The risk of loss or damage to the product is borne by the
party making the shipment, unless the purchaser requests a specific method of shipment. In this
case, the purchaser assumes the risk of loss.
This warranty is not transferable. Any implied warranties expire at the expiration date of this war-
ranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. This warranty does not cover a defect that has resulted from improper handling,
storage or preservation, or unreasonable use or maintenance as determined by us. This warranty is
void if there is any attempt to dissemble this product without factory authorization. This warranty
gives you specific legal rights, and you may also have other rights, which may vary from state to
state. Some states do not allow the exclusion of limitation of incidental or consequential damages,
so the above limitation or exclusions may not apply to you.
All items repaired or replaced under this warranty are warranted for the remainder of the original
warranty period. PS Engineering, Inc. reserves the rights to make modifications or improvements
to the product without obligation to perform like modifications or improvements to previously
manufactured products.
Factory Service
The units are covered by a two
-
year limited warranty. See warranty information. Call PS Engineer-
ing, Inc. at (865) 988
-
9800 before you return any unit. This will allow the service technician to
provide any other suggestions for identifying the problem and recommend possible solutions.
After discussing the problem with the technician and you obtain a Return Authorization Number,
ship product to:
PS Engineering, Inc.
Attn: Service Department
9800 Martel Rd.
Lenoir City, TN 37772
(865) 988
-
9800
FAX (865) 988
-
6619
Email: contact@ps
-
engineering.com
Units that arrive without an RMA number, or telephone number for a responsible
contact, will be returned un
-
repaired. PS Engineering is not responsible for items
sent via US Mail.
