8
The electrical connection of the drives is made via the terminal strip. For this, the wiring diagram must be observed
(see chap. 9.2).
Figure 1: Manual operation and setting of the DIP switches
6.2 Setting the actuators during commissioning (cover closed)
For actuation of the actuator during adjustment work in potentially explosive atmospheres (end position
adjustment), an electrical manual override by means of a push-button is provided in the cover (for conditions see
chapter 10.3). To reach the manual override, the screw plugs must be opened. The operating status (status display
LED in the Ex d control housing) is indicated by a sight glass in the cover (see figure 4) (see chapter 10.4).
Figure 2: Manual operation for setting work in potentially explosive atmospheres
Fastening
screw
Sight glas
Button B1
Button B2
Screw plugs removed
upper cover dismantled
Button B1
Fibre optics
Fastening screw
(4X)
Connection strip
Button B2
DIP switch S1
DIP switch S2
Position of buttons
and LEDs
