manualshive.com logo in svg

PS Audio BHK Signature 250, Owner'S Reference Manual

Share
Download
PS Audio BHK Signature 250 Owner'S Reference Manual Download Page 18

           Warranty 

4826 Sterling Drive, Boulder, CO 80301   

 

 

 

 

15-070-01-1

PH: 720.406.8946 [email protected] www.psaudio.com   

 

Rev A2

Warranty

©2015 PS Audio Inc.  All rights reserved.

®

  

Owner’s Reference  

BHK Signature Amplifiers

How State Law Applies

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Warranty Service Outside of the US

PS Audio has authorized distribution in many countries of the world.  In each country, the authorized importing 
distributor has accepted the responsibility for warranty of products sold by that distributor.  Warranty service should 
be obtained where the product was purchased.

Changes to Our Products

PS Audio reserves the right to modify the design of any product without obligation to purchasers of previously 
manufactured products and to change the prices or specifications of any products without notice or obligation to 
any person.

PS Audio Inc.
4826 Sterling Dr.
Boulder, CO 80301
Phone - 720.406.8946 
Fax - 720.406.8967
Email - 

[email protected]

Web - psaudio.com

13

Summary of Contents for BHK Signature 250



















Reviews:

No comments

Brands by name

Popular brands

Load more brands