Installation and Operating Instructions
AV-3000 and AV-5000 Power Centers
2.6.1.3 Control Panel – Infrared Codes
The Infrared Codes page allows you to setup your PS AV Power Center to issue IR
commands to any connected device as if you were standing there with the original
remote for the device. In order for this feature to work you must integrate your PS AV
Power Center with an IR distribution system.
To add a new IR command click on
Add New Code
1. Enter a name for the command you wish to setup.
2. Choose how you would like to trigger the event from the available options in the
Trigger Event
dropdown menu.
3. Cut and paste or type the desired hex code into the form.
4. Click
Add IR Code
button to save the command
5. Repeat for each code you wish to send.
To view and/or modify stored codes click on
View Stored Codes.
Commands may be
edited as outlined above.
4826 Sterling Drive, Boulder CO 80301
15-052-21-1 Rev B
PH: 720.406.8946 [email protected] www.psaudio.com
©2009 PS Audio International Inc. All rights reserved.
