PS Audio aspen FR30, Owner'S Reference Manual

Page: 7 / 20

®
Configuring
Speaker Feet
6
aspen FR30
For hard floors – twist to remove bottom 0.375” spiked tip from feet to expose the black
plastic disc underneath.
Note: For carpeted floors – spiked tips should be removed only after standing
bottom speaker cabinet up.
The foam covering the metal base of the bottom speaker enclosure can be placed
immediately to the side and used as a fulcrum to tilt and rotate the speaker onto its
spiked feet.
The bottom .375” spiked tips can then be removed and the included black carpet sliders
(located in the foam packaging covering the metal base of the speaker) can be screwed
into place.
This way, the speaker can be easily slid around during initial listening and setup. When
the final speaker location is determined, replace carpet sliders with the spiked tips for
best performance.
Getting Started