PS Audio aspen FR30, Owner'S Reference Manual

Page: 10 / 20

9
For bi-wiring/bi-amping do not connect the jumpers (as seen below).
aspen FR30
Getting Started
®
Jumper / Input
Wiring
(bi-amp, bi-wiring)
The FR30 comes with four input terminals as shown. For single wiring/amping, connect
the set of longer jumpers from the accessory box to parallel wire the black and red
terminals sets together (black to black and red to red) as shown below. Connect a single
amplifier to the left set of terminals.
The short set of jumpers is used to connect the upper enclosure to the bottom enclosure
(black to black, red to red).
Note: If using banana plugs, remove red and black plugs from binding posts.