Warning
To prevent fire or shock hazard, do not
expose the High Current Power Supply
to rain or moisture. To avoid electrical
shock, do not open the enclosure. Refer
servicing to qualified personnel only.
To prevent electric shock, use only a 3
prong, grounded type power cable.
Any change or modifications not expressly
approved in the manual could void your
warranty.
Safety Instructions
Read the operating instructions pro-
vided with the Analog High Current Power
Supply.
Retain the operating instructions for later
use and reference.
Unplug the Analog High Current Power
Supply from the wall outlet before chang-
ing the fuse or performing any cleaning or
service.
Do not operate the High Current Power
Supply near water. Avoid placement near a
water reservoir or excessive moisture.
When replacement parts are required,
ensure they are specified by the manufac-
turer to have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
Do not operate with faulty or frayed power
cables.
Overview
The PS Audio Analog High Current Power
Supply is designed to enhance the sonic
performance of the PCA-2 preamplifier as
well as other PS Audio accessories.
The Analog High Current Power Supply
is designed to improve upon conventional
design by housing a large power supply in
an external chassis. By locating the power
supply in an external chassis interference
between it and sensitive circuity of the PCA-
2 is minimized.
The Analog HCPS uses a huge toroidal
transformer coupled to 75,000 µf of storage
capacity. The Analog HCPS is designed to
readily deliver massive amounts of clean
current when the PCA-2 requires it.
•
Separate power cables for control cir-
cuitry and analog gain stage
•
Additional outlet to supply power to
other PS Audio accessories
•
Built in High Current Ultimate Outlet
•
PS Audio’s brushed aluminium chas-
sis
•
Front panel illumination control from
PCA-2
•
1 meter xStream connecting cables
included
2
