PRÜFTECHNIK VIB 5.300 EX Series, Operating Instructions Manual

Page: 51 / 172

2-35
VIBXPERT 11.2010
Getting started - Data transfer
Windows START menu
• Enter a valid IP address for VIBXPERT:
Take the first three numbers of your PC's IP address and change
the last number only (see also the following instructions). Make
sure that the IP address for VIBXPERT is not already allocated in
the network. Contact your system administrator if you work in a
company network.
• In the 'Subnetmask' field, enter the address of the subnetwork
where the PC is located.
• If necessary, enter the address of the gateway in the 'Standard-
gateway' field. If no gateway is used, set the field to '0.0.0.0'.
• To accept the settings, press MENU and click on 'OK'.
IP address of the local PC in the network
If the IP address and the subnet mask of the PC are not known, ask
your network administrator or find it yourself on the PC:
Open the DOS box on your PC:
• Click on “Start” and then on “Execute”.
• Enter
“cmd” (under Windows 2000 / XP).
• Enter “ipconfig -all” in the DOS box.
DOS box
Example: The screen displays the IP
address and the subnet mask of a PC in
a network:
IP address:
172.17.5.59
Subnet mask: 255.255.0.0