![Prozeda SOLAREG II VISION plus Operating Manual Download Page 24](http://html1.mh-extra.com/html/prozeda/solareg-ii-vision-plus/solareg-ii-vision-plus_operating-manual_1621652024.webp)
12 Warranty
conditions
The SOLAREG II controllers are carefully produced and tested on an automatic
testing station. If any failures occur, fi rst check if there are any operation / setting
or system errors. Furthermore, check the pump and temperature sensor connec-
tions.
PROZEDA GmbH provides a 2-year warranty starting at the date of purchase and
according to the following conditions.
a) The warranty comes into eff ect if the purchased good exhibits a material or
quality defect. If the defect is caused by improper handling, by exceeding the
permitted values stated in the specifi cations, improper wiring, invalid tech-
nical modifi cations to the device performed by the buyer or by an another
company other than PROZEDA GmbH, the warranty shall be void.
b) The warranty requires a written notice that describes the defect in detail as
well as a copy of the customer invoice.
PROZEDA GmbH can choose to fulfi l the guarantee, at its own discretion, by
one of the following measures
- Repair (reconditioning) or
- Delivery of a fully functional replacement product
The device shall be repaired within 1 month after PROZEDA GmbH has re-
ceived it.
If the device is not repaired within the two repairs attempts, the buyer is
entitled to delivery of a fully functional replacement product.
If a replacement product is delivered, a new warranty that corresponds to
these conditions shall come into eff ect.
c) Any further warranty (redhibitory action, reduction of price) is excluded.
Warranty claims may only be submitted by the customer and are non-transfer-
able.
If a defect occurs during the warranty period, please contact the supplier / in-
staller. When returning the device for warranty service, please make sure to send
a description of the error and, if possible, the system diagram along with the
wiring diagram.
13 Declaration of conformity
We, Prozeda GmbH, declare under our sole responsibility that the SOLAREG type
1316 product complies with the following standards:
EMC Directive 89/336/EEC, amended by RL 92/31/EEC and RL 93/68/EEC
EN 50081-1:1992 / EN55022:1998 (Radiated Emission)
EN 50082-1: 1997 / EN 61000-4-2:1995/A1:1998 (ESD)
/ EN 61000-4-3:1996+A1:1998 (Radiated Immunity)
/ EN 61000-4-4:1995 (Burst)
/ EN 61000-4-5:1995 (Surge)
/ EN 61000-4-6:1996 (Conducted Immunity)
/ EN 61000-4-11:1994 (Voltage Drops)
Operation manual for SOLAREG II VISION PLUS
1316BED026-20B-E, last revised 01/2008
24