Displaying and changing the values in the menus
14
Heating circuit 1-4
Menu item
Description
Description
Here you can specify a designation for the heating circuit.
The following terms are available: Heating circuit, Basement,
Ground level, Upper level, Floor, Radiator, Wall heating system,
Ceiling heating system, Top floor, Flat, Building.
Number
You can also issue a number. This makes sense when there are
several heating circuits e.g. on ground level.
Operating mode
Automatic
The control system runs by time program on the basis of the set
heating curves and in accordance with the outdoor temperature.
Manual day
The control system runs continuously in normal heating mode.
Manual night
The control system runs continuously in reduced mode.
Off/Summer
The heating circuits are switched off. The mixers close and remain
in this position. The "Anti-freeze" function remains active.
Party
The heating circuit runs in "Manual day" mode for the duration of
the value set here.
Holiday
The heating circuit runs in "Manual night" mode up until the date
selected here. The heating circuit will return to the previously set
operating mode when the selected date has elapsed.
Warmer-Colder/Room
set-point
The setpoint temperature for the supply line is changed by the
value set here.
If a navo 400 room user terminal is connected, you can enter the
required room temperature directly here.
Correction 1
The setpoint temperature for the supply line is reduced or
increased by the value set here.
Correction 2
Second correction value for the supply line setpoint temperature.
Positive values will increase the setpoint temperature.
Week overview
Complete week overview of the set time window.
Reduction windows 1–7
Here you can assign the 2 preset corrections and the "Off" mode to
a specific time window. Outside the time window, the heating
circuit will run in automatic mode.
Mo–Fr
Here you can select the week-days on which you want the
programmed time window to be active.
In this example the days selected are: Mo, Tu, We, Th, Fr.
22:00–06:00
Here you can select the start and stop times for the reduction
windows.
In this example the times are: Start: 22:00, Stop: 06:00
