External Antenna Details
●
Operating Range: 2400~2500MHz
●
Efficiency: 90%
●
Bandwidth (VSWR: 2.0 max.) 140 MHz / SWR < 2.0
●
Polarization: Linear
●
Radiation: Omni directional
●
Antenna Gain: 4dBi
●
Impedance: 50 ohm
●
Antenna: 40mm x 8mm / 1.6" x 0.3"
●
Weight: 0.7g
Reader Installation Details
Install Videos
Nano Inline: https://vimeo.com/393070586
Nano Connect:
Install Steps
1. Open the enclosure and remove the reader assembly
2. Locate the wiring harness and identify the V+/GND and D0/D1 wires
3. Connect the Nano to the existing wiring per the Wiring Instructions
4. Locate sufficient space to mount the Nano Inline or Nano Connect
a. For Nano Inline, locate the mobile reader next to the existing reader in a space that
allows both the existing physical card reader and the Nano Inline to fit into the turnstile
cavity such that the Nano Inline antenna can reach to the faceplate.
b. For Nano Connect, locate behind the existing reader closest to the base of the existing
reader’s pigtail
5. Attach the antenna. Refer to
.
6. Secure the Nano
a. For Nano Inline, secure the module into the scanner assembly using the provided
double sided mounting tape
b. For Nano Connect, secure the module behind the reader using the provided double
sided mounting tape
|
13
User Manual and Installation Guide: Mobile Reader Nano Inline & Mobile Reader Nano Connect
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/nano-install