The Proxxi Voltage Mobile App
Downloading and Pairing with the App
The Proxxi Voltage app is available for iOS and Android
●
Scan the QR code with a mobile device to download the app or
search “Proxxi Voltage” in the app store
●
To pair you will need the 4 digit code on the back of your wristband
and your mobile phone number
Using the Mobile App
Voltage can work independently from the app but using both in conjunction is recommended
●
An internet connection is required for data syncing
●
A cellular connection is required for login
●
Bluetooth is required for all interactions
The Home Screen
From the home screen of the app you will be able to view details including:
● Current battery levels and sync status of the wristband
● Current voltage detection mode (and alerting parameters) for the wristband
You are also able to test wristband alerts, triggering the wristband to flash, vibrate, and beep.
Wristband Details
In the Wristband section of the mobile app you will be able to view additional information about the Proxxi
Voltage Wristband
You can also:
● Pair and unpair your wristband from the app
● Power down the wristband
● Update the wristband firmware
Note: Powering down the wristband fully disables all wristband communication. To turn back on the wristband,
the user will need to put the wristband on charge for a few minutes.
Adjusting Alerts
In the Alerts section of the mobile app you can adjust the voltage sensitivity of the wristband. The settings are
configurable but the pre-loaded settings are based on Limits of Approach as defined in NFPA 70e. We
recommend that you select a voltage environment that is at or below the environment that you expect to be
working with.
Each time you change the voltage settings you will be asked to set the amount of time you’ll be working in that
environment. This is to ensure that you can’t accidentally leave the wristband’s sensitivity set to an
environment that isn’t aligned with your next workplace.
5