Using the Proxxi Voltage Wristband
When to Use the Wristband
Use the wristband on the default or other voltage setting for:
● Any environment where the equipment should be de-energized or is presumed to be electrically safe
● When intending to stay outside of the restricted approach boundary of live equipment
Mute the wristband or do not wear it for:
● Work on known like sources (live work, testing, and troubleshooting)
● DC equipment
● When not performing work around potentially hazardous sources (home, office, breaks, commuting)
Strap Sizing
●
Wear your wristband on the wrist of your dominant hand
●
When wearing your wristband, ensure that there is skin to wristband contact (do not
wear on top of a sleeve for example)
●
Customise by cutting off extra strap length following the scoremarks
●
Be sure to leave enough length to fit comfortably
Charging the Wristband
Charging
●
Plug the power adapter into an appropriate outlet
●
Connect the power adapter to the charging cradle
●
Set the wristband onto the cradle to charge
●
The wristband buzzes when coupled. A light on the charger will also
indicate that your wristband and charger are coupled
●
A full charge takes approximately 4 hours
●
The charge lasts approximately 24 hours, depending on usage
●
A solid green battery status light indicates the wristband is fully charged
Battery
●
A pulsing battery status light indicates the wristband is active
●
Light colour indicates battery status
●
Critically low status:
○
When the battery is critically low (9% or lower), your wristband
will flash and beep until it’s put on charge
3