Proximus Twist 504, User Manual

Page: 6 / 20

6 Twist 504
Twist 504
Battery advice
Use only the original battery (Li-Ion 3.7 V/550 mAh) as well as the
original power supply (6.5 VDC /300mA, 7.5 VDC /200mA).
The handset operating times (standby 220 hours/active 12 hours)
and charging times apply only if the battery is charged to the
defined minimum capacity.
Charging is electronically controlled to ensure optimal charging
and care of battery in different charge states. Full capacity is
achieved only after several charging cycles.
Note:
Using other rechargeable battery or non-rechargeable
battery/primary cells can be dangerous and cause
malfunctions or damage to the telephone. Do not
short-circuit the battery (danger). In particular, avoid
inadvertent shortcircuits during storage and transport e.g.
bunch of keys, metal panels or similar objects, and make
sure the battery do not come into contact with greasy
materials. When not in the handset, therefore, battery should
be stored only in insulating packaging. Ensure also that the
contacts do not touch greasy parts.
Rechargeable battery can become warm while recharging.
This is a normal occurrence and is not dangerous.
Inserting the battery
Step 1: To open the battery door, use a
small tool like a door key, plug the tip
into the recess at the end of handset.
Then, the door can be opened freely
(in the direction of the arrow).
Step 2: The battery compartment is
situated in the handset. Insert the
battery in the battery compartment.
Step 3: Replace the handset cover.
Make sure you install the battery pack and fit the cover the
right way round:
-
position the 3 metal contacts of the battery pack against
the 3 blade contacts;
-
align the green dot on the handset with the one on the cover.
-
align the cover top against the handset top, then clicks it
until middle and bottom sides click into place.
Green dots