Proximus P16-41487, User Manual

Page: 8 / 12

8
Charging your iPhone/iPod
Setting Alarm
Video Output from iPhone/iPod
You can charge your iPhone/iPod via the dock in either
stand by or operation mode.
Your iPhone/iPod will automatically charge when
docked. Ensure that the main power switch at the rear of the unit is
in the ON position.
1. Press and hold MEN/TIME button in shutdown state, the display will
flash ON/OFF to select setting alarm or canceling alarm.
2. Press PREVIOUS /NEXT to select ON, and the display will blink.
Press PREVIOUS/NEXT button repeatedly to set hour. Press MEM/
TIME to confirm, then press PREVIOUS/NEXT to set minute.
3. Press MEM/TIME to confirm, then press PREVIOUS/NEXT to
select iPod/Aux in status. Press MEM/TIME to confirm.
4. When no iPod is connected, the unit will charge to Aux in alarm
automatically.
5. The volume would turn up from zero to 25 gradually.
1. Connect the device to your television using a composite video
output cable.
2. On your iPhone/iPod, navigate to VIDEOS VIDEO SETTINGS
3. Dock the iPhone/iPod on the unit to begin playing a video from the
docked iPhone/iPod.
3. The minute digits on the display will now blink. Repeat the above
process until correct minute is set. Press the MEM/TIME to confirm the
minute setting.
4. You can also connect your iPhone or iPod to the device and power it
on, the display will automatically sync the time with the iPhone or iPod.
iPod