Proximus 5025 User Manual Download Page 189

Page: 189 / 216

Main Menu

Menus at Your SIP System Telephone

187

There are pre-defined message texts available for this. Select the

desired text. If no message is to be displayed, select the text

Available

Text

: List positions available for your own message text (23 characters

max.). Enter the text.

Operation at the Forum IPhone 5010/5020

–

key: You confirm the input.

–

key: You delete the character left of the cursor.

Operation at the Forum IPhone 5025/5030

–

softkey: You confirm the input.

–

Delete

softkey: You delete the character left of the cursor.

–

ABC/abc/123

softkey: You switch the character input mode.

Operation at the Forum IPhone 5040

Confirm the entry using the

softkey.

“Phone settings” Menu Group

Ring tone

:You can configure different ring tones for incoming calls on your

telephone. Select the desired ring tone from the list. If you do not want
a ring tone, select the list entry

Silent

If multiple trunk keys are configured for you telephone, you can set the
ring tone for each trunk key individually. Select the desired key and
confirm your selection.

Tip:

You can also set up the ring tones on the web console of the

communications system (in the menu

Configurator > Telephony >

Devices > System phones

External calls

Internal calls

VIP call

Door call

: Select for which

calls you want to configure the ring tone. Confirm your selection.

Operation at the Forum IPhone 5010/5020

Use the and keys to browse the list. Confirm your selection with

the

key.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands