ProxiMity UVC-SM Product Manual Download Page 9

Proximity 

UVC-SM

WARRANTY TERMS

REV G /2021

P7

3”

15° 

3.1”

2”

6.13”

6”

1.7”

1.4”

6.13”

5.5”

.76”

2.3”

Limited Warranty

 

  

Proximity System, Inc (hereafter referred to as ‘Proximity’) warrants its manufactured products 

to be free of defects in materials and workmanship under normal use and service to the original 
purchase for one (1) year  from the  date of purchase.  Unauthorized modi

fi

cation or alteration of the 

product, improper installation, and failures from inadequate inspection,

 

maintenance or abuse of the 

products will void this warranty. If any Proximity manufactured product is or becomes defective during 
the warranty period, Proximity will, at its option, either repair

,

 exchange

 

or replace defective unit. The 

purchaser should contact our Service Department for service. Proximity reserves the right to make 
design changes in manufactured products built and/or sold by them at any time without incurring any 
obligation to make the same or similar changes to previously designed /built and delivered units.

 

Proximity reserves the right to charge for replacement warranted parts or those parts which are found 
to have failed due to unauthorized modi

fi

cation or alteration of the product, improper installation, 

inadequate inspection or maintenance, damage in transit, or abuse of the product.  Photos and or 
additional information may be requested to identify defective parts.

 

Proximity reserves the right to 

make modi

fi

cations and improvements to products that may create slight di

ff

erences in the manual 

descriptions and illustrations.

 

 

This guide and any information provided are the property of Proximity Systems and not for re-

use or publication without written consent from Proximity Systems.

 

Proximity Systems, Inc 

 

 

11301 Boudreaux Rd.

 

 

Tomball, TX  77675 -7431

 

 

E-Mail Address:  [email protected]

 

 

1-800-437-8111

 

Summary of Contents for UVC-SM










Reviews: