Proximity
UVC-SM
SET-UP
REV G /2021
P3
( OPTION A. )
( OPTION B. )
A) Step 1:
Place the
stand
between
the UVC device and
the main bracket.
Attach the monitor
bracket
. Between the
UVC device and
the main
bracket.
B) Step 1:
B) Step 3:
Install 2 supplied
screws until
firm.
Install 2 supplied
screws until
firm.
Long
Short
Long
Short
0 degrees
15 degrees
(FLAT SQUARE)
This part will minimize
free rotation.
Long screw
holds rotation position with a
small amount of pressure.
Tighten until firm only.
Note:
Rotation Stop
Step 2:
Option
for
thin
monitor:
Adhere the bracket into place
at the back of the panel
Two sided adhesive is preinstalled.
Remove the adhesive paper.
Aligning the rear of the tab
with the front face of the monitor
or device, press down on the metal
bracket over the adhesive locations.
Plug In Power.
Step 4:
Plug In Power
Step 5:
(supplied adapter
or a USB 3.0.)
Power is on.
