Downloaded from Projector.com
USER GUIDE
SVGA LCD PROJECTOR
9
using a power cord compatible with the local electrical voltage. Never
operate the projector outside the electrical voltage specification. If you
are unsure about the type of electrical service at your location, please
consult your dealer or local Power Company.
14.
POWER CORD PROTECTION
- Power cords should be routed so that
they are not likely to be walked on, pinched or unduly bent by items
placed upon or against them. Pay particular attention to cords and
cables at the point where they exit from the projector.
15.
GROUNDING OR POLARIZATION
- Precautions should be taken so
that grounding or polarization of the projector is maintained. Do not use
a three-prong to a two-prong adapter.
16.
ELECTRICAL SHOCK
- To reduce the risk of electrical shock, do not
open the unit. Refer all servicing to authorized personnel only.
17.
CLEANING
- The projector should be cleaned only as recommended,
see the Maintenance section. Disconnect the power cord from the power
outlet before cleaning. Do not use liquid, spray or aerosol cleaners.
18.
NON-USE PERIODS
- The power cord of the projector should be
unplugged from the outlet when left unused for a long period of time.
19.
LAMP REPLACEMENT
- Replace projection lamp with same type and
rating as shown in the Technical Data section. Allow unit to cool down
before replacement.
20.
SERVICING
- The user should not attempt to perform unusual or
technical service to the projector. Do not open the unit, except for the
lamp replacement door. Refer all servicing to authorized personnel only.
Replace damaged cords or cables with original replacement parts only.
21.
DAMAGE REQUIRING SERVICE
- The projector should be serviced by
authorized personnel when:
•
Objects have fallen, or liquid spilled, into the projector
•
The projector has been exposed to water or moisture
•
The projector does not appear to operate normally (fan not
working, noise, smell, smoke, heat etc.)
•
The projector has been dropped or damaged
22.
ABNORMALITY
- If you detect any abnormal smell or smoke,
immediately disconnect power plug. Disconnect the power plug from the
inlet to prevent fire or electrical shock.
