Proxima Pro AV 9400 User Manual Download | Manualshive

Page: 39 / 60

background image

Downloaded from Projector.com

38

IMAGE
ADJUST DISPLAY

TABLE OF PICTURE IMAGE ADJUSTMENT

COLOUR

TINT

WHITE BALANCE (R/G/B)

CONTRAST

BRIGHTNESS

SHARPNESS

0

63

0

63

63

63

31

0

63

0

0

0

DECREASES

INCREASES

DECREASES

INCREASES

MORE PURPLE

MORE GREEN

LIGHTER

DEEPER

DARKER

BRIGHTER

SOFTER

SHARPER

MAIN MENU DISPLAY

Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows.

1. Press MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT (REAR CLICK) BUTTON. Another

dialog box IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.

3. In this dialog box, you can adjust the settings by increasing or decreasing the levels shown as numbers. The items and

the range of the levels that you can adjust are summarized in the table below.

4. Press the POINT DOWN BUTTON and a red arrow will appear.
5. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).
6. To increase the level, point the arrow to

▲

and then press the SELECT (REAR CLICK) BUTTON. To decrease the level,

point the arrow to

▼

and then press the SELECT (REAR CLICK) BUTTON.

7. You may want to store the settings in the memory so that you can recall them later. To store the settings, move the

arrow to Stored and then press the SELECT (REAR CLICK) BUTTON. When you have stored the settings, "OK ?" is
displayed for confirmation.

8. Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON. The stored settings are permanently held

even if the MAIN ON/OFF is switched off.

9. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.

10.If you do not want to store the settings, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.

The settings changed remains effective until the MAIN ON/OFF switch is turned off.

11.To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT

(REAR CLICK) BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes
and then press the SELECT (REAR CLICK) BUTTON. You can adjust the settings again if needed.

NOTE : "TINT" will be skipped in the PAL, SECAM, PAL-M and PAL-N mode.

VIDEO MODE

PICTURE IMAGE ADGUSTMENT

«
...
37
38
39
40
41
...
»

Summary of Contents for Pro AV 9400





























































Reviews:

No comments

Related manuals for Pro AV 9400

Brand: Samsung Pages: 6

Brand: Samsung Pages: 101

Brand: Samsung Pages: 84

Brand: Samsung Pages: 52

P410M - LED-based DLP Pocket Projector

Brand: Samsung Pages: 51

Inti R699800 series

Brand: Dream Vision Pages: 56

Brand: Echogear Pages: 2

Brand: i3-TECHNOLOGIES Pages: 76

Brand: BOXLIGHT Pages: 40

Brand: Harman Pages: 139

Brand: HQ Power Pages: 13

Brand: Panasonic Pages: 111

Brand: Panasonic Pages: 112

Brand: Panasonic Pages: 150

Brand: Panasonic Pages: 212

Brand: Panasonic Pages: 213

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands