Proxima DP8200x, User Manual

Page: 11 / 52

9
Displaying a computer image
Remove the lens cap.
Press the power switch to position “1” on the back of the projector, then
press the
Power
button on the top of the projector or the remote.
The LED flashes green and the fans start to run. When the lamp comes on,
the startup screen is displayed and the LED is steady green. It can take a
minute for the image to achieve full brightness.
? No startup screen?
Get help on page 17.
Turn on your computer.
The computer’s image should appear on the projection screen. If it doesn’t,
press the
Computer
button on the projector’s keypad.
Make sure your laptop’s external video port is active.
Many laptops do not automatically turn on their external video port when a
projector is connected. Usually a key combination like FN + F5 is used to
turn the external display on and off. Refer to your computer’s documenta-
tion to learn your computer’s key combination.
? No computer image?
Try pressing the
Auto Image
button on the keypad. Get help on page 17.
remove lens cap
1
2
press Power switch
press Power button
I
O
turn on computer
activate laptop’s external port