Proxima DP1200x, User Manual

Page: 29 / 46

27
Using the menus
To open the menus, press the
Menu
button on the keypad. (The menus auto-
matically close after 60 seconds if no buttons are pressed.) The Main menu
appears. Use the arrow buttons to move up and down to highlight the
desired submenu, then press the
Select
button.
To change a menu setting, highlight it, press
Select
, then use the up and
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or off using check boxes. Press
Select
to confirm
your changes. Use the arrows to navigate to another setting. When your
adjustments are complete, navigate to Previous, then press
Select to go to
the previous menu; select Exit or press the
Menu
button at any time to close
the menus.
Dots appear before the menu name. The number of dots indicate the menu’s
level, ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
• The Picture menu provides image adjustments.
• The Settings menu provides set-up type adjustments that are not
changed often.
• The About menu provides a read-only display of information about the
projector and source.
Certain menu items may be hidden until a particular source is connected.
For example, Sharpness is only available for video sources and will be hid-
den when a computer source is active. Other menu items may be grayed out
when they are not available. For example, Brightness is grayed out until an
image is active.
Keypad navigation
buttons
Main menu
Menu
button
Dot
Picture
menu
Settings
menu
Dots
About menu