51
This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
This switching function prevents remote control
interference when operating several projectors
or video equipment at the same time.
The projector is assigned 10 different remote
control codes (Code 0-9), which are default
initial code (Code 0) and another 9 codes (code
1-9).
Code set on the projector and remote control
should be the same. For example, when using
code 7 to operate the projector, remote control
code also must be switched to Code 7.
Change the projector's code: Select "Remote
control" in advanced menu.
Change the remote control code: Press the OK
button and a number key (0-9) on the remote
control for more than 5 seconds to switch the
codes. When the light strat flashing, it means
code is setting ok.
Note:
● If the code set on the projector and remote control
is different, it will not execute any operation. In
this case, switch the remote control code to the
same code as that of the projector.
●
If the battery is removed for a long period of time
from the remote control, the remote control code
will be reset.
Remote control
RC sensor
Remote control
Factory default
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
Remote control
Remote control
Code 0
RC sensor
Front
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
Remote control
Remote control
Code 0
RC sensor
Front
Return to factory default?
Yes
No
Move Select Back
Expand
Light
Set RC sensor when using remote control to
operate projector.
Front .....Choose the front remote control
receiver.
Back .... .Choose the back remote control
receiver.
Both ..... Choose both front and back remote
control receivers.
