28
5. Load a packet driver for your Ethernet card.
A packet driver usually has parameters that
are set on the driver load line. It does not
require LSL or a NET.CFG configuration
file like an ODI driver does. Skip to step 8.
Alternatively, you may use the Ethernet
card's ODI driver rather than a packet
driver. In this case, proceed with step 6.
6. To use the Ethernet card's ODI driver, copy
this driver into the same directory as the
RangeLAN2 7500 Configuration Software.
6. Edit the NET.CFG file for this ODI driver
using a text editor like MS-DOS's Edit and
add the following information:
LINK SUPPORT
BUFFERS 6 1600
Add the following line as the first frame
type in the Link Driver Section:
FRAME ETHERNET_II
7. Load the ODI driver and the ODIPKT
program. The ODI driver, the NET.CFG
file, and the LSL.COM file must be in the
same directory. For example, if the ODI
driver were called ETHDRVR.COM, you
would load:
Summary of Contents for RangeLAN2 7500
Page 1: ...RANGELAN2 Model 7500 User s Guide ...
Page 28: ...22 ...
Page 40: ...34 ...
Page 48: ...42 ...
