P a g e
|
9
ProX Lighting - Prizma User Manual
Version 1.2 AD 5/29/2018
STAT - This menu will let you select your desired static color mode and strobe mode.
1.
Tap the MENU button until “STAT” is displayed, press ENTER.
2.
There will be six options. Press ENTER can select the option and press UP or DOWN button can select the
value you desire as below.
1) red~R000~R255
2) gree~G000~G255
3) blue~B000~B255
4) white~W000~W255
5) anbe~A000~A255
6) strobe~ST00~ST20
COLO - Build-in color mix
1.
Tap the MENU button and UP button or DOWN button until “COLO” is displayed, press ENTER.
2.
“CoX” will now be displayed, “X” representing a number between 1 and 51 will be displayed. Press the
UP or DOWN buttons to select either a static color mode.
AUTO - This menu will let you select your desired auto mode
1.
Tap the MENU button and UP button or DOWN button until “AUTO” is displayed, press ENTER.
2.
“Autx” will now be displayed, you can confirm three modes by UP or DOWN for auto mode.
SOUD - This menu will let you select your desired sound mode
1.
Tap the MENU button until “SOUD” is displayed, press ENTER.
2.
“SOUD No.x” or “SOUD SENS” will now be displayed, you can confirm three modes by UP or DOWN for
sound mode. “SOUD SENS” will display the Sensitivity of sound.
REMO - This menu will let you select your desired remo mode
1.
Tap the MENU button until “REMO” is displayed, press ENTER.
2.
“on” or “off” will now be displayed, you can select to close or open the infrared
REST - This will display the System all value Reset
1.
Press the UP or DOWN button until “REST” is displayed, press ENTER.
2.
The software version will be displayed.
INFO -This menu will display the light information
1.
Tap the MENU button and UP button or DOWN button until ”INFO” is displayed, press ENTER.
2.
DISP this will display the time of display panel, if you select “ON” means after 20 seconds the display
panel will turn off, if you select “OFF” means the display panel will always display.
3.
TEMP this will display the temperature at work
4.
TIME this will display the light operating time
SLAV - This menu will let you select your desired Master/slave mode
1.
Tap the MENU button until “SLAV” is displayed, press ENTER.
2.
“Sla” will now be displayed, Slave mode is confirmed. It will repeat the master unit in auto mode sound
mode and chase mode.
