P a g e
|
2
ProX Lighting - Prizma User Manual
Version 1.2 AD 5/29/2018
NOTICE:
©2018 Xstatic Pro, Inc. A
ll rights reserved. ProX Lighting believes that the information contained in this manual
is accurate in all respects. However Information, specifications, diagrams, images, and instructions herein are
subject to change without notice. ProX Lighting logo and identifying product names and numbers herein are
trademarks of Xstatic Pro, Inc. Copyright protection claimed includes all forms and matters of copyrightable
materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used
in this document may be trademarks or registered trademarks of their respective companies and are hereby
acknowledged. All non- ProX Lighting brands and product names are trademarks or registered trademarks of
their respective companies.
Xstatic Pro, Inc
.
and all affiliated companies hereby disclaim any and all liabilities for property, equipment,
building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the
use or reliance of any information contained within this document, and/or as a result of the improper, unsafe,
insufficient and negligent assembly, installation, rigging, and operation of this product.
SAFETY NOTES:
1.
Please read these instructions carefully.
2.
Keep all information and instructions in a safe place.
3.
Follow the instructions.
4.
Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5.
Use the equipment only in the intended manner and for the intended purpose.
6.
Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed
securely and cannot fall down.
7.
During installation, observe the applicable safety regulations for your jurisdiction.
8.
Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat.
Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9.
Never place sources of ignition, e.g., burning candles, on the equipment.
10.
Ventilation slits must not be blocked.
11.
Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor
equipment - in this case, observe the special instructions noted below. Do not expose this equipment to
flammable materials, fluids or gases.
12.
Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on or near the equipment.
13.
Make certain that objects cannot fall into or upon the device.
14.
Use this equipment only with the accessories recommended and intended by the manufacturer.
15.
Do not open or modify this equipment.
16.
After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17.
During transport, make certain that the equipment cannot fall down and possibly cause property
damage and personal injuries.
18.
If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment
or if it has been damaged in any other way, switch it off immediately and unplug it from the mains
outlet (if it is a powered device). This equipment may only be repaired by ProX authorized & qualified
personnel.
19.
Clean the equipment using a dry cloth.
20.
Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard. Plastic bags must be kept out of reach of children.
