10.1.2 VGA
You can also connect an external device with the Prowise Touchscreen via VGA cable. Please note: this only
enables a video connection. Add an audio signal by plugging in a 3.5mm jack (stereo) in the Audio in port.
1.
Connect a VGA cable to the VGA port of the external PC and the VGA port of the touchscreen.
2.
Once all cables are connected, switch on the touchscreen and the external device.
3.
As soon as the touchscreen and the external PC have booted up, navigate to ‘Input’ in the Central menu
and select the VGA source.
10.1.3 DP
You can also connect an external device to the Prowise Touchscreen via a DP port
1.
Connect a cable to the DP port of the external PC and to the DP input of the touchscreen.
2.
Once the cables have been connected, switch on the touchscreen and the external PC.
3.
As soon as the touchscreen and the external PC have booted up, navigate to ‘Input’ in the Central menu
and select the source.
10.1.4 AV
The composite video signal is a signal that emits transmits both video and audio. You can connect the composite
video with the Prowise Touchscreen with a 3.5mm Jack plug (Male with 3 rings) in the AV in port (Audio L, Audio
R and Video)
10.1.5 YPBPR
The composite video signal (YPbPr) is a video signal split in 3 signals (luminance signal Y, chrominance signal Blue
and chrominance signal Red). This signal does not include audio.
Connect the component video signal with the Prowise Touchscreen with a 3.5mm Jack plug (Male with 3 rings)
via the YpbPr port (luminance and 2x chrominance) Connect the audio signal to the Prowise Touchscreen with a
3.5mm Jack plug (stereo) in the AV in port. To receive both video and audio signals on the Prowise Touchscreen,
you need to connect two jack plugs split into 5 RCA connectors at the source. (Red, Green, Blue)(Red, White).
www.prowise.com
41 / 53