PW-DN551D
300M Wireless N PCI Adapter
12
3. The adapter will be connecting to the target network.
Figure 3-8
4. When the following window appears, you have successfully connected to the network.
Figure 3-9
3.2.2 PIN method
There are two ways to configure the QSS by PIN method:
1) Enter the PIN from your AP device.
2) Enter a PIN into your AP device.
Following are detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your AP device
1. Open AWCU and click
WPS
tab. Select
Enter the PIN of my access point or wireless
router
. In the empty field beside PIN, enter the PIN labeled on the bottom of the router (here
takes 13492564 for example). If you have generated a new PIN code for your router, please
enter the new one instead. Click
Connect
to continue.
