background image

M-WN823N 

Wireless N USB Adapter User Guide

 

17

 

)

 

Note: 

1) Select different 

authentications

 and 

data encryptions

, the security configuration is 

different. 

2) When you select channel manually, the available network authentication are Open 

System, Shared key and WPA-None. 

3)  The RTWCU does not support WPA 802.1x authentication in Windows Vista, while the 

Windows Zero Config Tools may satisfy your need. 

 

 

ASCII -

 Select this option, you can enter any ASCII characters to compose the 

password. 

 

Key Index -

 Select the index of the password.

 

 

Network Key & Confirm network key -

 The fields configure the network key. The two 

should be the same.

 

¾

 

802.1x configure -

 This configures the 802.1x security, it is available when you select the 

data encryption as WPA 802.1X, WPA2 802.1X or WEP 802.1X. 

 

EAP TYPE -

 Select the EAP type for the 802.1x configuration, the options are: GTC, TLS, 

LEAP, TTLS, PEAP.

 

 

Tunnel -

 Select the tunnel: MD5, GTC, TLS, and MSCHAP-V2. The option is necessary 

for the EAP type of TTLS and PEAP.

 

 

Username -

 Enter the username for authentication. The option is necessary for the EAP 

type of TTLS and PEAP.

 

 

Identity -

 Enter the identity for the authentication. 

 

 

Password -

 Enter the password for the authentication. The option is necessary for the 

EAP type of LEAP, TTLS and PEAP.

 

 

Certificate -

 Select the certificate you apply.

 

1.  Open System authentication 

When you select the 

Open System

 as the authentication, the Disabled and WEP can be available 

for the data encryption. If you select 

Disabled

, you don’t need to configure any passwords. If you 

select 

WEP

, you can configure the password as follows.

 

For example:

 If the wireless network takes Open System authentication, WEP data encryption, 

the password is 64bit with the value of 0123456789. The index is 1. 

Summary of Contents for M-WN823N




































Reviews: