SCSI to SCSI RAID Subsystem
16
User Manual
2.1.3 Controller Board Replacement
NOTE: It is necessary to use ESD anti-static device when handling
sensitive parts of the controller module.
1.
Loosen the thumb screws. Raise the controller handle and pull out the
controller module until it moves out of the slot.
2.
Release the memory module lock and remove the memory module.
3.
Remove four screws at the bottom of the controller module. Note that there
are four hex screws supporting the controller board to the module case.
4.
Remove the eight (8) lock nut screws at the front panel.
