9
10
C
RE
ATE
For multicolored designs, change
screens and repeat flooding and printing
steps for each color. Design must be
dry to the touch before printing next
layer. Do not remove article from platen
between printing different colors or you
will lose registration.
Allow ink to dry on article.
TIP: To keep ink from drying in screen
while in use, lightly spritz with water.
9. heAT seT INK
For apparel items, heat set ink. Using
high setting on an iron, cover design
with paper or cloth and iron for 3 to 4
minutes on each side.
DO NOT IRON
gARmeNT whIle ON PlATeN.
10
Lower lid and grasp squeegee with
both hands. Using firm, even, downward
pressure, pull squeegee across screen.
Lift lid and remove screen. Wipe any
excess ink from screen and rinse screen
thoroughly with water. Do not allow ink
to dry on screen.
TIP: Ink can be reused by scraping
excess back into container.
TIP: When using light ink on a darker
material, pull ink across screen multiple
times before lifting lid.
TIP: When using the same screen design
for multiple objects, flood the design on
the screen with ink to prevent drying out
until next use on same project.
WARNING: Do not allow ink to dry
in screen. This may damage screen.
Remove dried ink from screen by using
HOT water and an abrasive scrubbing
pad. May take 3-5 minutes of aggressive
scrubbing to see results. Results may vary.
