14
How to set the slave monitor address
Maximum 4 monitors can be connected in one apartment, one master monitor together with 3 slave monitors, so you
should set the address correctly.(note :must have one monitor to be set as master monitor)
The code of 8000 # is used to set the master monitor.
The code of 8001 # is used to set the first slave monitor . The code of 8002# is
used to set the second slave monitor . The code of 8003# is used to set the
third slave monitor .
Entry of ALL digits is required, for example 8008 is entered as 8 0 0 8 #
Note :touch # to save the settings
(MARKED AS ENTER IN DIAGRAM) and
* button to cancel the input
, touch (MARKED AS
BACK SPACE IN DIAGRAM)
How to set date and time format
The system offers two methods of date and time
8009# is used to set the date format as date/month/year.
8008# is used to set the date format as month/date/year.
8012# is used to set the time format as 12 hour system
8013# is used to set the time format as 24 hour system
How to set the monitor panel on
8006# is used to set the slave monitor as simultaneous display . This is required to be entered into EACH SLAVE
monitor for simultaneous answer.
In default mode, when receiving a call, the master and slave monitors will ring at the same time, and just the master
monitor can display the image while the slave monitors cannot. The settings can be changed, you can set the master
monitor and all the slave monitors to panel on at the same time when receiving a call, just input the code number of 8006
on each slave monitor.
Press call button
When receiving calling, all monitors can display the image at the same time
on door station