3
IPC “S Series” User Manual
③
Modify the IPC’s IP address. The default IP address of this camera is 192.168.226.201. Click
on the empty square to “tick” mark the desired IPC from the list (as seen in the below table).
Click on “Batch set net” and input the desired parameters to modify the IP address, subnet mask
and gateway of the camera and make sure the network address is in the same local network
segment as the computer. You can change the IP address of more than 1 camera in one go by
using the “batch set NET” action.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please input the password of the
administrator and click “Modify” button to modify the setting.
④
Double click on the camera line and the IP manager will pop up the IE browser to
automatically connect to the IPC. For the first use – you will have to install the camera ActiveX
plugin. After downloading and installing the plugin, a login window will pop up as shown below.
The default login credentials are “admin” & “
123456
”.
