22
IPC “S Series” User Manual
1. Select “Enable”.
2. RTSP Port: Access port of the streaming media. The default number is 554.
3. RTSP Address: Showing the RTSP address you need to input in the media player.
4. Check “Allow anonymous login” to allow RTSP stream without authentication.
4.4.7
UPNP
If you enable this function, you can quickly access the camera via LAN and you don’t need to
configure port mapping when the camera is connected to the WAN via the router.
Go to Config
Network
UPnP:
Select “Enable UPNP” and then input friendly name.
After you enable it and set the UPnP name, you will see the UPnP name by clicking “Network”
on the desktop of your computer which is in the same local area network. Then double click
this name to access the camera quickly.
4.4.8
Mail configuration
If you need to trigger E-mail when an alarm occur or if the IP address was changed, please set
the E-mail here first.
Go to Config
Network
Email.
