Page 18
IP CAMERA USER MUANUAL
4.4.1
Port
1. Enter into "Network config"
"Port" to see the interface as shown in Fig 5-10:
Fig 5-10 Port Config
2. Input port number for IE access in the "HTTP Port" textbox.
1.
Input the port number for audio & video transmission in the "Data Port" textbox.
4.4.2
Wired
1. Enter into "Network Configuration"
"Wired" to see a tab shown as Figure 5-11:
Fig 5-11 Wired Config
2. There are two Options for setup IP: obtain an IP address auto by DHCP protocol and
use the following IP address, user can choose one of options for requirements.
3. Use the following IP address: display the IP address, subnet mask, gateway and DNS
of the device.
4. PPPOE: User needs to manual input the user name and password for dial-up internet.
Firstly, user needs to login IE clients, then enter into user name and password of PPPoE,
save the setting and exit. Secondly, setup IP address change notice. Thirdly, connect
with Modem, then the device will dial-up internet automatically.
6. Press the "Save" button to save the settings.