Page 5
IP CAMERA USER MUANUAL
3)
IE Remote Access
User can connect IP-Cam through LAN or WAN. Here only take IE browser (6.0)
for example. The details are as follows:
2.4
LAN
In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly
access through IE browser.
2.4.1
Access through IP-Tool
Step 1: Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is
installed in the PC from the CD.
Step 2: Use IP-Tool to modify the network of IP-Cam. Then, double click the
icon on the desktop to run this software as shown below:
After starting IP-Tool and clicking the IP-Cam in the list, user can check the information
of IP-Cam. If user cannot confirm which one is himself, please shut off the electricity of
the IP-Cam and then power on it. When shutting off the power, the device information
will disappear. When powering on, the device information will emerge. Well, this device
is the used device. Right click the device information and
select “network
setup
”. Then
the network setup window will pop up.