11
４）MIDI Receive Channel
The MIDI receive channel can be set to any individual channel from 1 through 16, ALL channels, or reception can be turned
OFF. The initial default setting is ALL.
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 4 (“4rc”) and press the ENTER switch.
You can then use the INC/+ and DEC/- switches to select a channel from 1 through 16, ALL, or OFF. Once the required
selection has been made press the ENTER switch to confirm the selection and return to the edit menu.
５）MIDI Transmit Channel
The MIDI transmit channel can be set to any individual channel from 1 through 16, or transmission can be turned OFF. The
initial default setting is “ch1.”
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 5 (“5tc”) and press the ENTER switch.
You can then use the INC/+ and DEC/- switches to select a channel from 1 through 16, or OFF. Once the required selec-
tion has been made press the ENTER switch to confirm the selection and return to the edit menu.
６）MIDI Control Change Number
MIDI control change numbers 0 through 120, or OFF, can be assigned to the PEC-2 L1 ~ L8, MODE, and MUTE switches.
The corresponding switch is turned ON when the assigned control change number is received via the MIDI IN connector.
The assigned control change number will also be transmitted via the MIDI OUT connector when the corresponding switch
is pressed.
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 6 (“6cc”) and press the ENTER switch.
You can then use the INC/+ and DEC/- switches to select a switch: L1 ~ L8, MODE or MUTE. Press ENTER again and use
the INC/+ and DEC/- switches to select a control change number: 0 ~ 120, or OFF. Once the required selection has been
made press the ENTER switch to confirm the selection and return to the edit menu.
７）MIDI OUT/THRU Connector Setup
This parameter determines whether the PEC-2 MIDI OUT/THRU connector functions as a MIDI OUT connector or a MIDI
THRU connector. When MIDI OUT operation is selected, operations on the PEC-2 controls are transmitted as MIDI data via
the MIDI OUT/THRU connector. When MIDI THRU operation is selected any data received via the MIDI IN connector is re-
transmitted via the MIDI OUT/THRU connector.
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 7 (“7ot”) and press the ENTER switch.
You can then use the INC/+ and DEC/- switches to select MIDI OUT, or MIDI THRU. Once the required selection has been
made press the ENTER switch to confirm the selection and return to the edit menu.
Default MIDI Control Change Number Assignments
L1
CC# : 102
L2
CC# : 103
L3
CC# : 104
L4
CC# : 105
L5
CC# : 106
L6
CC# : 107
L7
CC# : 108
L8
CC# : 109
MODE
CC# : 110
MUTE
CC# : 111
Caution:
Be sure to press the ENTER switch to confirm and enter your selection after editing menu items 1 through 7, above. You can cancel
an edit operation and return to the PGM mode by pressing the MODE switch.
