10
9. The Edit Mode
The edit mode provides access to the PEC-2’s detailed parameters. All edit parameters are accessed by pressing the MODE
switch for longer than 3 seconds to enter the EDIT mode, and then using the DEC/- and/or INC/+ switches to select the desired
parameter.
The Edit Mode Menu
The nine parameters accessible via the edit mode are described below. The parameters are identified by abbreviations on the
display. Please refer to the descriptions below for the meanings of the display abbreviations. In some cases you may also need
to refer to section 7, “Technical Details”.
１）Memory Protect
This function prevents unwanted changes to the contents of the 84 program memories. We recommend that you turn the mem-
ory protect function on before a performance to prevent accidents. The initial default setting is “off.”
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 1 (“1Pr”) and press the ENTER switch. You
can then use the INC/+ and DEC/- switches to turn the memory protect function on or off, respectively. Once the required
selection has been made press the ENTER switch to confirm the selection and return to the edit menu.
２）Link Mode
The Link mode has three possible settings: LINK, MASTER, and SLAVE. The initial default setting is LINK. When using the PEC-
2 alone be sure to set this parameter to LINK or MASTER.
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 2 (“2Lr”) and press the ENTER switch. You
can then use the INC/+ and DEC/- switches to select LINK, MASTER, or SLAVE. Once the required selection has been made
press the ENTER switch to confirm the selection and return to the edit menu.
３）Mute Disengage Mode
The Mute Disengage Mode can be set to either AUTO or MANUAL. The initial default setting is AUTO.
In the edit mode use the DEC/- and/or INC/+ switches to select edit menu number 3 (“3Mt”) and press the ENTER switch. You
can then use the INC/+ and DEC/- switches to select AUTO or MANUAL. Once the required selection has been made press the
ENTER switch to confirm the selection and return to the edit menu.
