5
Modified Sine Wave
Safety instruction
―
Faulty assembly or connection
―
Damage to the appliance resulting from mechanical influences and excess voltage
―
Alterations to the device without express permission from the manufacturer
―
Use for purposes other than those described I the operating manual
―
Use the device only as intended.
―
Do not operate the device in a damp or wet environment.
―
Maintenance and repair work may only be carried out by qualified personnel who are
familiar with the risk involved and the relevant regulations.
2.2 Safety when installing the device
●
Ensure the device is standing firmly.
The device must be set up and fastened in such a way that it cannot tip over or fall down.
●
Take the precautions necessary to ensure that children cannot interfere with operation.
Dangerous situations may occur which cannot be recognized by children!
●
Do not expose the device to a heat source (such as direct sunlight or heating). Avoid
additional heating of the device in this way.
For installation on boats
●
If electrical devices are incorrectly installed on boats, corrosion damage might occur.
Have the inverter installed by a specialist (marine) electrician.
Electrical cables
●
If cables have to be fed through metal walls or other walls with sharp edges, use ducts or
wire bushings to prevent damage.
●
Do not lay cables which are loose or bent next to electrically conductive material (metal).
●
Do not pull on the cables.
●
Do not lay the 230 V mains cable and the 12 V DC cable in the same duct.
●
Fasten the cables securely.
●
Lay the cables so that they cannot be tripped over or damaged.
