10
Modified Sine Wave
Connecting the inverter
Caution
Do not reverse the polarity. Reversing the polarity of the connections will
cause a great spark and the internal fuses will melt.
Caution
Only extend the connection line with cables with and equal or greater cross
section.
Below cross section is for 100% copper wire, does not include thickness of
wire cover.
Device Required cable cross section Cable standard in AWG
100% copper wire
(American wire gauge)
INV300N 3.00mm² 14#AWG
INV600N
5.30mm² 10#AWG
INV1000N
10.00mm² 8#AWG
INV1500N
16.00mm² 5#AWG
INV2000N
2x12.00mm² 2x7#AWG
6
Using the inverter
Switch on at the device
☞
Set the main switch(fig. 1.4 page 2 ) to “ON”.
√
The green LED (fig. 1.5 page 2) lights up.
Switch off at the device
☞
Set the main switch(fig. 1.4 page 2 ) to “OFF”.
√
The green LED (fig. 1.5 page 2) goes out.
