6
OPERATION
The monitor will automatically turn on when the vehicle is in reverse gear.
There are 5 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the monitor. When the monitor image is on,
the blue LED will be lit. If there is power to the monitor, but the monitor image is OFF,
the blue LED will blink on and off. When the monitor power is off, no picture can appear
on the screen and the blue LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below:
Repeat pressing the Menu button to select
Brightness
,
contrast
,
colour
or
direction
of the picture.
Press the button or button to adjust settings within the
control selected. Press the button to increase the value
and press the button to decrease the value.
To change the orientation of the screen image, press the menu button until
direction
is
selected. By pressing the or button repeatedly, different screen orientations will be
available. These different views allow you to
mount the camera and monitor in any
position with keeping the right picture on
the monitor.
To exit the menu screen, select
exit
on the screen.
Guideline button
This camera system has the option to show distance-
guidelines on the display. This helps you to visually see
the distance between the objects behind your car. By
pressing the guideline button, you can switch this
option on and off.
Menu button
Guideline button
Power button